Syensqo & TOMRA partner to advance the sorting of multilayer PVDC packaging waste

Joint project proves the feasibility of separating multilayer PVDC films from polyolefins in used packaging structures
Syensqo & TOMRA partner to advance the sorting of multilayer PVDC packaging waste
Photo - Syensqo
Published on

Syensqo and TOMRA, a leading provider of sensor-based sorting technology and solutions for the circular economy, have joined forces to demonstrate the technical and economic feasibility of separating and sorting multi-component plastic structures in which polyvinylidene chloride (PVDC) serves as a barrier layer.

The partners developed a joint set of experiments with multilayer samples of commercial packaging waste consisting of low-density polyethylene (LDPE) and Syensqo’s Ixan PVDC. The results have proven that multilayer films containing PVDC can be separated from mixed plastic waste using industrial sorting equipment to achieve clean-grade polyolefin and PVDC recycling streams.

“The overall target of this project was to challenge major industry standards which claim that multilayer PVDC films cannot be sorted out of multilayer packaging structures,” explains Federico Baruffi, global marketing manager, Specialty Polymers, at Syensqo. “Our experiments have demonstrated the contrary and are sending a clear message to the packaging and recycling industry that it can be done, notably with good accuracy and repeatability using existing industrial technology.”

The positive results apply to markets that are currently generating multi-layer mixed plastic waste containing PVDC, such as shrink films in consumer and food packaging.

“One of the concerns in the recycling industry was the reliable identification of polymeric waste with PVDC content,” adds Marco Gregori, area sales manager Italy at TOMRA Recycling Sorting. “By combining our advanced optical and near-infrared detection systems, we managed to achieve a selectivity rate of more than 80% when sorting from post-consumer plastic mix and more than 95% when sorting from LDPE monolayer stream. This is yet another example of what today's technology, in this case our AUTOSORT, can already do.”

Altogether, these results have extended the scope of mixed plastic waste suitable for recycling to a wide range of multi-layer structures containing PVDC. The joint project between Syensqo and TOMRA is also considered a role model of advancing the circularity of the plastics industry through the dedicated research and development of industry partners who share similar values.

Click HERE to subscribe to our FREE Weekly Newsletter

Related Stories

No stories found.
logo
FoodTechBiz.com
www.foodtechbiz.com